FREE SHIPPING ON ORDERS OVER $99! (US ORDERS)

HUGE DISCOUNTS ON CLEARANCE PRODUCTS

Maximizing Engine Performance with Oil Catch Cans

Maximizing Engine Performance with Oil Catch Cans

by NGR Performance

Running top-quality products is crucial for peak engine performance. An oil catch can significantly impact your motor's performance by preventing harmful buildup. This guide will explain how an oil catch can works, detail its advantages, and provide easy-to-follow installation and maintenance steps. Follow this guide to avoid costly repairs and enhance your engine's performance.

What is an Oil Catch Can?

An oil catch can is a canister shaped device designed to collect oil vapors and contaminants from the engine before they re-enter the intake system. This prevents carbon buildup, which can cause extensive engine damage. The canister contains a filter that captures oil droplets from the air, allowing clean air to pass through. The hoses connect the can to the engine's PCV (Positive Crankcase Ventilation) system.

How Does an Oil Catch Can Work?

An oil catch can is installed within the PCV system. While the PCV system controls engine pressure, it also allows oil droplets to pass through with the air, leading to carbon buildup and potential engine damage. The oil catch can intercepts these oil droplets and contaminants before they reach the intake system, ensuring only clean air circulates.

Oil Catch Can Installation

Tools Needed:

Step-by-Step Procedure:

  • Locate the PCV System: Identify the PCV system and its hoses attached to the intake system. The oil catch can will be installed in this area.
  • Disconnect the Hose: Remove the hose connecting the PCV system to the intake system.
  • Connect Hoses to the Catch Can: Attach the hoses to the inlet and outlet points on the oil catch can, securing them with hose clamps.
  • Mount the Catch Can: Mount the catch can inside the engine bay using the provided hardware and brackets. Ensure it is easily accessible for cleaning and maintenance.
  • Connect the Inlet Hose: Connect the inlet hose from the PCV valve to the inlet point of the catch can.
  • Connect the Outlet Hose: Connect the outlet hose of the catch can to the intake system.
  • Tighten All Fittings: Ensure all connections are tight and free of leaks. 

    •  Maintenance

    Regular maintenance of the oil catch can is essential for optimal performance. Watch for the following signs that indicate maintenance is needed:

    • Increased oil consumption
    • Overflow in the canister
    • Decreased engine performance

    Maintenance Steps:

    • Remove the Catch Can: Locate and carefully remove the oil catch can or canister.
    • Drain and Clean: Drain the contents and remove any deposits. Clean the filter with a brake parts cleaner and dry it thoroughly.
    • Clean the Canister: Wipe the canister with a clean cloth, removing all moisture and oil residue.
    • Reassemble and Reinstall: Reassemble the components and reinstall the catch can. Ensure all parts are dry before reinstallation.
    • Check for Leaks: After reinstallation, check for any leaks and tighten fittings as necessary.

    Advantages of an Oil Catch Can

    • Improved Fuel Efficiency: By preventing carbon buildup, the engine runs more efficiently, leading to better fuel economy.
    • Reduced Carbon Build-Up: Keeps the intake system clean, reducing the risk of engine damage.
    • Enhanced Engine Performance: Maintains optimal engine performance by ensuring clean air intake.

    By following this guide, you can select and install the right oil catch can for your vehicle, ensuring improved performance and reduced maintenance costs. Regular upkeep will keep your engine running smoothly and efficiently.

     

    by NGR Performance

    Post a comment

    Please note, comments must be approved before they are published